Your Location:Home > News > Industry News

Power tool compulsory certification implementation rules

Hits:Updated:2019-05-24 13:05:30【Print】

  1. Scope of application The product range applicable to this rule is: those that are operated by hand, equipped with a power cord (including a power box or motor-generator set) and equipped with a power switch, driven by an electric motor or by an electromagnet. Electric tools. This rule does not apply to Class III tools, intermediate frequency power tools (except tools powered by power boxes or motor-generator sets or power converters), explosion-proof power tools and battery-operated power tools as described in Annex K of GB 3883.1. 2. Certification mode Type test + initial factory inspection + post-certification supervision. 3. Basic aspects of certification 3.1 Application for certification 3.2 Type test 3.3 Initial factory inspection 3.4 Evaluation and approval of certification results 3.5 Supervision after certification 4. Basic requirements for certification implementation 4.1 Application for certification 4.1.1 Division of application units 4.1.1.1 The application units are divided according to product type, type, specification, working principle, safety structure, etc. (see Annex 1 for details). 4.1.1.2 The certification client applies for certification according to the application unit. Products produced by the same producer (manufacturer), the same product model, and different production enterprises (different production sites) shall be treated as different application units, and the type test shall be carried out only on the samples of one production enterprise (production site), and if necessary, other Products of the production company (production site) are required to provide samples/data for consistency check and report. The same product produced by the same manufacturer (same production site) and different producers (manufacturers) shall be used as different application units, and the type test shall be carried out only on the sample corresponding to one producer (manufacturer), if necessary, Cohere with the samples/data of other producers (manufacturers) for consistency check and report.
客服中心
工作時(shí)間

周一至周日

8:00 - 18:00

點(diǎn)擊這里給我發(fā)消息 銷售客服


請直接QQ聯(lián)系!
展開客服